Home » FULLERKREG Pan-head Pocket Hole Screws

FULLERKREG Pan-head Pocket Hole Screws

FULLERKREG Pan-head Pocket Hole Screws

FULLERKREG pan-head pocket hole screws are designed for concealed wood joints where controlled driving and reduced splitting risk matter. Compared with larger-head pocket-hole screws, the smaller pan head makes this style a preferred choice for extremely hard woods and 1/2 in. stock. A smaller shank diameter further reduces the chance of splitting the workpiece.

Available Part Numbers and Specifications

The following specification list reproduces the Part#, dimensions, construction, surface treatment, application, and package quantities shown in the supplied reference images.

Part# Application Specification Size Surface Treatment Package Quantity
SPS-F075-100 Indoor Fine Thread · Pan Head 3/4 in. Zinc 100 pcs
SPS-F075-500 Indoor Fine Thread · Pan Head 3/4 in. Zinc 500 pcs
SPS-F075-1200 Indoor Fine Thread · Pan Head 3/4 in. Zinc 1,200 pcs
SPS-F1-100 Indoor Fine Thread · Pan Head 1 in. Zinc 100 pcs
SPS-F1-500 Indoor Fine Thread · Pan Head 1 in. Zinc 500 pcs
SPS-F125-100 Indoor Fine Thread · Pan Head 1-1/4 in. Zinc 100 pcs
SPS-F125-500 Indoor Fine Thread · Pan Head 1-1/4 in. Zinc 500 pcs
SPS-F150-100 Indoor Fine Thread · Pan Head 1-1/2 in. Zinc 100 pcs
SPS-F150-500 Indoor Fine Thread · Pan Head 1-1/2 in. Zinc 500 pcs
SPS-C1-100 Indoor Coarse Thread · Pan Head 1 in. Zinc 100 pcs
SPS-C1-250 Indoor Coarse Thread · Pan Head 1 in. Zinc 250 pcs
SPS-C1-500 Indoor Coarse Thread · Pan Head 1 in. Zinc 500 pcs

Key Product Features

  • Smaller pan head: Preferred for extremely hard woods and 1/2 in. stock where a compact head profile is advantageous.
  • Smaller shank diameter: Reduces material displacement and helps lower the chance of wood splitting.
  • Fine and coarse thread choices: Thread geometry can be matched to the density and structure of the workpiece.
  • Zinc surface treatment: The listed Part# range is intended for indoor use.
  • Multiple package quantities: Selected sizes are available in 100-, 250-, 500-, or 1,200-piece packs as shown above.

Thread Selection Guide

Thread Style Recommended Materials Selection Notes
Fine Thread Ash, maple, hickory, mahogany, oak, walnut, cherry, and birch Preferred for dense and extremely hard woods. The finer pitch provides controlled engagement and helps reduce splitting risk.
Coarse Thread Plywood, particle board, MDF, melamine, pine, cedar, fir, spruce, basswood, butternut, and aspen Preferred for softwoods and engineered wood. The deeper, wider thread profile provides strong engagement in softer fibers.

Screw Length Selection Guide

Choose screw length according to the actual thickness of the material being joined. Pan-head screws are particularly well suited to 1/2 in. stock, but pocket depth, pilot-hole position, joint orientation, and tip clearance must still be checked before production use.

Material Thickness Recommended Screw Length
1/2 in. (13 mm) 1 in. (25 mm)
5/8 in. (16 mm) 1 in. (25 mm)
3/4 in. (19 mm) 1-1/4 in. (32 mm)
7/8 in. (22 mm) 1-1/2 in. (38 mm)
1 in. (25 mm) 1-1/2 in. (38 mm)
1-1/4 in. (32 mm) 2 in. (51 mm)
1-1/2 in. (38 mm) 2 in. (51 mm)
1-3/4 in. (44 mm) 2-1/2 in. (64 mm)
2 in. (51 mm) or thicker 2-1/2 in. (64 mm)

How to Select the Right Screw

  1. Measure the workpiece: Select length from the actual material thickness.
  2. Consider pan-head geometry: Choose the smaller head and shank for extremely hard woods, 1/2 in. stock, or applications where splitting risk must be reduced.
  3. Match the thread: Use fine thread for dense hardwoods and coarse thread for softwoods or engineered wood.
  4. Confirm the Part#: Match size, thread style, and package quantity to the specification table.
  5. Test the setup: Verify pocket depth and driver engagement on scrap material before production.

Typical Applications

  • Extremely hard wood pocket-hole joints
  • Assemblies made from 1/2 in. stock
  • Cabinet carcasses, face frames, and built-in furniture
  • Tables, shelving, storage units, and workshop fixtures
  • Indoor plywood, MDF, and solid-wood assemblies

Product Showcase

Product image placeholder 1 Product image placeholder 2 Product image placeholder 3 Product image placeholder 4

Why FULLERKREG

🔩 Fastener-focused support: Clear specification guidance helps buyers compare thread, size, finish, and package quantity.

📐 Selection clarity: Practical tables make it easier to match screws to wood type and workpiece thickness.

🧪 Application-focused sourcing: Product selection is organized around wood density, stock thickness, splitting risk, and installation conditions.

📦 Custom packaging for every sales channel: Whether you sell through Amazon or other e-commerce platforms, or through supermarkets and other offline retail channels, we can create packaging tailored to your brand, products, and market requirements.

🚚 Project-ready supply: Contact FULLERKREG with the required Part#, quantity, and application details for availability and quotation.

Sorry, this collection is empty.
Continue shopping