Phillips Countersunk Screws (GB819-2016 / DIN 965H / EN ISO 7046-2)

FULLERKREG supplies Phillips (cross recessed) countersunk flat head machine screws manufactured to GB819-2016, DIN 965H, and EN ISO 7046-2. The 90° countersunk head profile allows flush or sub-flush installation into pre-countersunk holes, making these screws ideal for panels, enclosures, furniture, and structural assemblies where a clean, flat surface finish is required. Available in four material and surface grades, size range M1.6 – M10, lengths 3 – 80 mm.

---

Product Gallery

[ Product Image 1 ]

[ Product Image 2 ]

[ Product Image 3 ]

[ Product Image 4 ]

---

Select by Material & Grade

Phillips Countersunk Screws (GB819-2016 / DIN 965H / EN ISO 7046-2) — Stainless Steel (A2)
Material: A2 (SUS304 / 1.4301)  ·  Surface: Passivated & Whitened  ·  Class: A2-70  ·  Size: M1.6 – M10

Phillips Countersunk Screws (GB819-2016 / DIN 965H / EN ISO 7046-2) — Marine Stainless Steel (A4)
Material: A4 (SUS316 / 1.4401)  ·  Surface: Passivated & Whitened  ·  Class: A4-70  ·  Size: M1.6 – M10

Phillips Countersunk Screws (GB819-2016 / DIN 965H / EN ISO 7046-2) — Steel (4.8) — Bright Zinc Plated
Material: Low-Carbon Steel  ·  Surface: Zinc Cr3 (BZP, RoHS)  ·  Class: 4.8  ·  Size: M2 – M10

Phillips Countersunk Screws (GB819-2016 / DIN 965H / EN ISO 7046-2) — Alloy Steel (8.8) — Zinc Cr3
Material: Alloy Steel 10B21  ·  Surface: Zinc Cr3 (RoHS)  ·  Class: 8.8  ·  Size: M3 – M10

---

Grade Selection Guide

Grade	Material	Surface	Strength	Best For
A2	SUS304	Passivated	A2-70 / 700 MPa	General corrosion resistance, indoor/outdoor, food & medical equipment
A4	SUS316	Passivated	A4-70 / 700 MPa	Marine, coastal, chloride & chemical environments
4.8	Carbon Steel	Zinc Cr3 (BZP)	420 MPa	General indoor assembly, cost-sensitive applications
8.8	Alloy Steel 10B21	Zinc Cr3	800 MPa	Structural, high-load, mechanical & automotive assemblies

---

Standard & Product Overview

Drive Type	Phillips (Type H) — ISO 4757 / GB/T 3098
Head Type	Countersunk Flat Head — 90° included angle, flush installation
Standards	GB819-2016 / DIN 965H / EN ISO 7046-2
Thread	Metric Coarse (ISO 68-1), tolerance 6g per ISO 965-1
Size Range	M1.6 – M10
Length Range	3 mm – 80 mm
Head Angle	90° (countersunk)
Brand	FULLERKREG

---

Why FULLERKREG

🏭 Direct Manufacturer — Full in-house production from wire drawing to finished fastener.
📐 Standard Compliance — GB819-2016 / DIN 965H / EN ISO 7046-2 dimensional and mechanical inspection on every batch.
📦 Wholesale Ready — Flexible MOQ, bulk pricing, OEM/private label for distributors and industrial buyers.
🚢 Global Shipping — Export documentation (CO, packing list, inspection reports) for international orders.
✅ RoHS & REACH Compliant — Cr3 coatings only; compliance documentation available on request.