DIN 910 Hexagon Head Pipe Plugs

FULLERKREG supplies DIN 910 hexagon head pipe plugs in both metric and imperial BSPP thread forms, across stainless steel and low-pressure carbon steel grades. The external hexagon head allows installation and removal with a standard open-end or ring wrench — ideal for high-access sealing of ports, passages, and threaded holes in hydraulic systems, pneumatic equipment, and plumbing installations. Select your thread type and material below:

---

Metric Thread (DIN 910 — Metric)

Straight metric thread with flat sealing face — requires copper or aluminium sealing washer for pressure-tight seal.

Metric Hex Head Pipe Plugs (DIN 910) — Stainless Steel A2 Material: A2 / SUS304  |  Thread: Metric Straight  |  Surface: Passivated  |  Size: M10–M48

Metric Hex Head Pipe Plugs (DIN 910) — Marine Stainless Steel A4 Material: A4 / SUS316  |  Thread: Metric Straight  |  Surface: Passivated  |  Size: M10–M48

Metric Hex Head Pipe Plugs (DIN 910) — Low-Pressure Steel Material: Carbon Steel  |  Thread: Metric Straight  |  Surface: Self-colour / Zinc Plated  |  Size: M10–M48

---

Imperial BSPP Thread (DIN 910 — G Thread)

British Standard Pipe Parallel (BSPP / G thread) — straight thread requiring bonded seal or copper washer for pressure-tight sealing. Widely used in hydraulic and pneumatic systems.

Imperial BSPP Hex Head Pipe Plugs (DIN 910) — Stainless Steel A2 Material: A2 / SUS304  |  Thread: BSPP (G)  |  Surface: Passivated  |  Size: G1/8–G2

Imperial BSPP Hex Head Pipe Plugs (DIN 910) — Marine Stainless Steel A4 Material: A4 / SUS316  |  Thread: BSPP (G)  |  Surface: Passivated  |  Size: G1/8–G2

Imperial BSPP Hex Head Pipe Plugs (DIN 910) — Low-Pressure Steel Material: Carbon Steel  |  Thread: BSPP (G)  |  Surface: Self-colour / Zinc Plated  |  Size: G1/8–G2

---

Product Gallery

[Product Photo 1]

[Product Photo 2]

[Product Photo 3]

[Product Photo 4]

---

DIN 910 vs DIN 906 — Which Plug to Choose?

Feature	DIN 910 (Hex Head)	DIN 906 (Socket / Allen Key)
Drive	External hex — open-end / ring wrench	Internal hex — Allen key
Access	Requires clearance around head	Fits in recessed / confined spaces
Thread Type	Metric straight / BSPP (G)	Metric tapered / BSPT (R)
Sealing	Flat face — requires sealing washer	Taper thread self-seals
Torque Capacity	Higher — larger wrench engagement	Limited by Allen key size
Typical Use	Hydraulic manifolds, high-torque ports	Recessed ports, confined spaces

Can’t find the thread type or size you need? Contact FULLERKREG — additional thread forms and materials available on request.