Set Screws (Grub Screws) — DIN 913 / 914 / 915 / 916

FULLERKREG supplies a complete range of socket set screws (grub screws) across all four standard point types and all major material grades. Fully threaded with no head — designed to sit flush with or below the surface for locking, positioning, and clamping applications. Select your point type and material below:

---

DIN 916 / ISO 4029 — Cup Point Set Screws

Most popular point type — cup-shaped recess bites into shaft for strong grip and vibration resistance.

Cup Point Set Screws (DIN 916) — Stainless Steel A2 Material: A2 / SUS304  |  Surface: Passivated  |  Size: M3–M20

Cup Point Set Screws (DIN 916) — Marine Stainless Steel A4 Material: A4 / SUS316  |  Surface: Passivated  |  Size: M3–M20

Cup Point Set Screws (DIN 916) — Alloy Steel 45H Black Oxide Material: 45H Alloy Steel  |  Surface: Black Oxide  |  Strength: Grade 12.9  |  Size: M3–M20

Cup Point Set Screws (DIN 916K) — Serrated Locking, Alloy Steel 45H Black Material: 45H Alloy Steel  |  Surface: Black Oxide  |  Feature: Serrated locking tip — anti-vibration  |  Size: M3–M16

---

DIN 915 / ISO 4028 — Dog Point Set Screws

Extended cylindrical dog point for positive location in drilled holes — ideal for precise shaft positioning.

Dog Point Set Screws (DIN 915) — Stainless Steel A2 Material: A2 / SUS304  |  Surface: Passivated  |  Size: M3–M20

Dog Point Set Screws (DIN 915) — Marine Stainless Steel A4 Material: A4 / SUS316  |  Surface: Passivated  |  Size: M3–M20

Dog Point Set Screws (DIN 915) — Alloy Steel 45H Black Oxide Material: 45H Alloy Steel  |  Surface: Black Oxide  |  Strength: Grade 12.9  |  Size: M3–M20

---

DIN 914 / ISO 4027 — Cone Point Set Screws

Sharp cone point for permanent locking into soft shafts — maximum holding power, not for frequent adjustment.

Cone Point Set Screws (DIN 914) — Stainless Steel A2 Material: A2 / SUS304  |  Surface: Passivated  |  Size: M3–M20

Cone Point Set Screws (DIN 914) — Marine Stainless Steel A4 Material: A4 / SUS316  |  Surface: Passivated  |  Size: M3–M20

Cone Point Set Screws (DIN 914) — Alloy Steel 45H Black Oxide Material: 45H Alloy Steel  |  Surface: Black Oxide  |  Strength: Grade 12.9  |  Size: M3–M20

---

DIN 913 / ISO 4026 — Flat Point Set Screws

Flat end point for clamping without marking the shaft surface — ideal for frequent adjustment and soft materials.

Flat Point Set Screws (DIN 913) — Stainless Steel A2 Material: A2 / SUS304  |  Surface: Passivated  |  Size: M3–M20

Flat Point Set Screws (DIN 913) — Marine Stainless Steel A4 Material: A4 / SUS316  |  Surface: Passivated  |  Size: M3–M20

Flat Point Set Screws (DIN 913) — Alloy Steel 45H Black Oxide Material: 45H Alloy Steel  |  Surface: Black Oxide  |  Strength: Grade 12.9  |  Size: M3–M20

---

Product Gallery

[Product Photo 1]

[Product Photo 2]

[Product Photo 3]

[Product Photo 4]

---

Point Type Selection Guide

Point Type	Standard	Best For	Shaft Marking
Cup Point	DIN 916 / ISO 4029	General locking, vibration resistance	Moderate
Dog Point	DIN 915 / ISO 4028	Precise shaft location, sliding fits	None
Cone Point	DIN 914 / ISO 4027	Permanent locking, soft shafts	Heavy (permanent)
Flat Point	DIN 913 / ISO 4026	Frequent adjustment, delicate surfaces	Minimal

Can’t find the size or grade you need? Contact FULLERKREG — additional grades and sizes available on request.