{"title":"GB9074.4-1988 Phillips Pan Head SEMS Screws - Marine Stainless Steel (A4)","description":"\u003ch1\u003eGB9074.4-1988 Phillips Pan Head SEMS Screws – Marine Stainless Steel A4 (SUS316) – A4-70\u003c\/h1\u003e\n\n\u003cp\u003eFULLERKREG supplies GB9074.4-1988 Phillips pan head SEMS screws manufactured from marine-grade austenitic stainless steel A4 (SUS316 \/ 316 \/ 18-10-Mo), with a bright-pickled and passivated surface finish. Each screw ships with a pre-assembled flat washer (GB9074.24) and a spring washer (GB9074.26), permanently captivated on the shank — delivering the highest level of corrosion resistance available in the GB9074.4 SEMS screw range, with zero loose washer handling on the assembly line.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eWhat are Phillips Pan Head SEMS Screws?\u003c\/h2\u003e\n\n\u003cp\u003eSEMS screws (also called combination screws or pre-assembled screws) are fasteners in which one or more washers are permanently captured on the screw shank before threading. The washer(s) are assembled onto the blank shank and then the thread is rolled, making the outer diameter of the thread larger than the inner diameter of the washer — so the washer can never fall off during handling or installation.\u003c\/p\u003e\n\n\u003cp\u003eGB9074.4-1988 defines the Chinese national standard for \u003cstrong\u003ecross-recessed (Phillips) pan head combination screws\u003c\/strong\u003e with pre-assembled spring washer and plain washer. The assembly is expressed as:\u003c\/p\u003e\n\n\u003cp style=\"text-align:center;\"\u003e\u003cstrong\u003eGB9074.4 = GB818 (Pan Head Screw) + GB9074.24 (Plain Washer) + GB9074.26 (Spring Washer)\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe pan head profile provides a broad, low-profile bearing surface for excellent load distribution. The Phillips (cross-recessed) drive enables fast, reliable torquing with standard power tools and is well-suited to both manual and automated assembly environments.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eBenefits of Using Phillips Pan Head SEMS Screws in A4 Stainless Steel\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEliminates loose washer handling\u003c\/strong\u003e — washers are permanently captivated; no separate picking, placing, or alignment required during assembly.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFaster assembly\u003c\/strong\u003e — one part replaces three; dramatically reduces cycle time in high-volume or field assembly operations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReduced risk of missing washers\u003c\/strong\u003e — captive design prevents washer omission errors that can cause field failures or warranty claims.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuperior chloride corrosion resistance\u003c\/strong\u003e — the 2–3% molybdenum content in SUS316 dramatically improves resistance to chloride-induced pitting and crevice corrosion compared to A2 (SUS304), making A4 the preferred choice for marine, coastal, and chemical environments.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExcellent resistance to acids \u0026amp; chemicals\u003c\/strong\u003e — SUS316 resists a wide range of acids, alkalis, and industrial chemicals including sulfuric acid, phosphoric acid, and chloride-containing cleaning agents.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNon-magnetic \u0026amp; hygienic\u003c\/strong\u003e — austenitic stainless steel is non-magnetic and easy to clean, suitable for food processing, pharmaceutical, and medical applications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo coating required\u003c\/strong\u003e — corrosion resistance is inherent to the alloy; no risk of coating delamination, flaking, or plating failure in service.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpace-saving installation\u003c\/strong\u003e — the shortened unthreaded shank allows clamping of thinner panels; minimum clampable thickness is approximately half that of standard combination screws.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnti-loosening\u003c\/strong\u003e — the pre-assembled spring washer provides continuous axial load to resist vibration-induced loosening in service.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuitable for automated feeding\u003c\/strong\u003e — consistent geometry and captive washers make these screws ideal for vibratory bowl feeders and robotic assembly systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eMaterial \u0026amp; Finish\u003c\/h2\u003e\n\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;max-width:720px;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color:#f2f2f2;\"\u003e\n      \u003cth style=\"text-align:left;\"\u003eComponent\u003c\/th\u003e\n      \u003cth style=\"text-align:left;\"\u003eMaterial\u003c\/th\u003e\n      \u003cth style=\"text-align:left;\"\u003eSteel Grade\u003c\/th\u003e\n      \u003cth style=\"text-align:left;\"\u003eSurface Treatment\u003c\/th\u003e\n      \u003cth style=\"text-align:left;\"\u003eStrength Grade\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eScrew Body\u003c\/td\u003e\n      \u003ctd\u003eMarine Stainless Steel A4 (SUS316 \/ 18-10-Mo)\u003c\/td\u003e\n      \u003ctd\u003eAISI 316\u003c\/td\u003e\n      \u003ctd\u003eBright Pickled \u0026amp; Passivated\u003c\/td\u003e\n      \u003ctd\u003eA4-70\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePlain Washer (Flat)\u003c\/td\u003e\n      \u003ctd\u003eStainless Steel A4 (SUS316)\u003c\/td\u003e\n      \u003ctd\u003eAISI 316\u003c\/td\u003e\n      \u003ctd\u003eBright Pickled \u0026amp; Passivated\u003c\/td\u003e\n      \u003ctd\u003e—\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSpring Washer\u003c\/td\u003e\n      \u003ctd\u003eStainless Steel A4 (SUS316)\u003c\/td\u003e\n      \u003ctd\u003eAISI 316\u003c\/td\u003e\n      \u003ctd\u003eBright Pickled \u0026amp; Passivated\u003c\/td\u003e\n      \u003ctd\u003e—\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eA4-70\u003c\/strong\u003e denotes marine-grade austenitic stainless steel (A4) with a minimum tensile strength of 700 MPa. The molybdenum addition (2–3%) is the critical differentiator from A2 (SUS304), providing significantly enhanced resistance to pitting and crevice corrosion in chloride-rich environments such as seawater, de-icing salts, and industrial process fluids.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey mechanical properties (A4-70):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eTensile strength: ≥ 700 MPa\u003c\/li\u003e\n  \u003cli\u003e0.2% proof stress: ≥ 450 MPa\u003c\/li\u003e\n  \u003cli\u003eElongation: ≥ 20%\u003c\/li\u003e\n  \u003cli\u003eHardness: ≤ 220 HV\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eChemical composition highlights (SUS316 \/ AISI 316):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eChromium (Cr): 16.0 – 18.0%\u003c\/li\u003e\n  \u003cli\u003eNickel (Ni): 10.0 – 14.0%\u003c\/li\u003e\n  \u003cli\u003eMolybdenum (Mo): 2.0 – 3.0% — key to superior chloride resistance\u003c\/li\u003e\n  \u003cli\u003eCarbon (C): ≤ 0.08%\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eTypical salt-spray resistance: \u003cstrong\u003e≥ 500 hours\u003c\/strong\u003e to red rust — significantly exceeding A2 stainless (≥ 200 h) and zinc-plated steel (≥ 48–72 h).\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eDimensional Data – GB9074.4-1988 Phillips Pan Head SEMS Screws\u003c\/h2\u003e\n\n\u003cp\u003eThread range: \u003cstrong\u003eM3 – M8\u003c\/strong\u003e  |  Length range: \u003cstrong\u003e5 mm – 50 mm\u003c\/strong\u003e  |  Drive: Phillips (Cross Recessed, Type H)\u003c\/p\u003e\n\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;font-size:13px;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color:#f2f2f2;\"\u003e\n      \u003cth\u003eThread (d)\u003c\/th\u003e\n      \u003cth\u003ePitch (mm)\u003c\/th\u003e\n      \u003cth\u003eHead Dia. dk (mm)\u003c\/th\u003e\n      \u003cth\u003eHead Height k (mm)\u003c\/th\u003e\n      \u003cth\u003eDrive No.\u003c\/th\u003e\n      \u003cth\u003eMin. Clamp Thickness (mm)\u003c\/th\u003e\n      \u003cth\u003eMax. Clamp Thickness (mm)\u003c\/th\u003e\n      \u003cth\u003eUnit Weight (g\/100 pcs)*\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003e0.5\u003c\/td\u003e\n\u003ctd\u003e5.6\u003c\/td\u003e\n\u003ctd\u003e2.0\u003c\/td\u003e\n\u003ctd\u003ePH1\u003c\/td\u003e\n\u003ctd\u003e0.5\u003c\/td\u003e\n\u003ctd\u003evaries by length\u003c\/td\u003e\n\u003ctd\u003e~41\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003e0.7\u003c\/td\u003e\n\u003ctd\u003e8.0\u003c\/td\u003e\n\u003ctd\u003e2.6\u003c\/td\u003e\n\u003ctd\u003ePH2\u003c\/td\u003e\n\u003ctd\u003e0.6\u003c\/td\u003e\n\u003ctd\u003evaries by length\u003c\/td\u003e\n\u003ctd\u003e~102\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eM5\u003c\/td\u003e\n\u003ctd\u003e0.8\u003c\/td\u003e\n\u003ctd\u003e9.5\u003c\/td\u003e\n\u003ctd\u003e3.3\u003c\/td\u003e\n\u003ctd\u003ePH2\u003c\/td\u003e\n\u003ctd\u003e0.8\u003c\/td\u003e\n\u003ctd\u003evaries by length\u003c\/td\u003e\n\u003ctd\u003e~198\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eM6\u003c\/td\u003e\n\u003ctd\u003e1.0\u003c\/td\u003e\n\u003ctd\u003e12.0\u003c\/td\u003e\n\u003ctd\u003e3.9\u003c\/td\u003e\n\u003ctd\u003ePH3\u003c\/td\u003e\n\u003ctd\u003e1.0\u003c\/td\u003e\n\u003ctd\u003evaries by length\u003c\/td\u003e\n\u003ctd\u003e~340\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003ctd\u003e1.25\u003c\/td\u003e\n\u003ctd\u003e16.0\u003c\/td\u003e\n\u003ctd\u003e5.0\u003c\/td\u003e\n\u003ctd\u003ePH4\u003c\/td\u003e\n\u003ctd\u003e1.2\u003c\/td\u003e\n\u003ctd\u003evaries by length\u003c\/td\u003e\n\u003ctd\u003e~800\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp style=\"font-size:12px;\"\u003e* Unit weight is approximate for a representative length (e.g., 16 mm). SUS316 density ~7.98 g\/cm³. Actual weight varies by length. Contact FULLERKREG for exact weight data per SKU.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eDimensions of Pre-Assembled Washers\u003c\/h2\u003e\n\n\u003cp\u003eThe flat washer conforms to \u003cstrong\u003eGB9074.24\u003c\/strong\u003e dimensions. The spring washer conforms to \u003cstrong\u003eGB9074.26\u003c\/strong\u003e. All washer components are stainless steel A4 (SUS316), fully matched to the screw body material for complete galvanic compatibility and uniform corrosion resistance throughout the assembly. Both washers are permanently captivated on the screw shank prior to shipment.\u003c\/p\u003e\n\n\u003ch3\u003eFlat Washer Dimensions (GB9074.24)\u003c\/h3\u003e\n\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;max-width:600px;font-size:13px;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color:#f2f2f2;\"\u003e\n      \u003cth\u003eThread (d)\u003c\/th\u003e\n      \u003cth\u003eInner Dia. d1 (mm)\u003c\/th\u003e\n      \u003cth\u003eOuter Dia. d2 (mm)\u003c\/th\u003e\n      \u003cth\u003eThickness h (mm)\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003e3.2\u003c\/td\u003e\n\u003ctd\u003e6.0\u003c\/td\u003e\n\u003ctd\u003e0.5\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003e4.3\u003c\/td\u003e\n\u003ctd\u003e8.0\u003c\/td\u003e\n\u003ctd\u003e0.8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eM5\u003c\/td\u003e\n\u003ctd\u003e5.3\u003c\/td\u003e\n\u003ctd\u003e9.0\u003c\/td\u003e\n\u003ctd\u003e1.0\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eM6\u003c\/td\u003e\n\u003ctd\u003e6.4\u003c\/td\u003e\n\u003ctd\u003e11.0\u003c\/td\u003e\n\u003ctd\u003e1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003ctd\u003e8.4\u003c\/td\u003e\n\u003ctd\u003e15.0\u003c\/td\u003e\n\u003ctd\u003e1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp style=\"font-size:12px;\"\u003eNote: GB9074.24 plain washer outer diameters are optimized for the SEMS captive assembly process and are slightly smaller than DIN 125A equivalents.\u003c\/p\u003e\n\n\u003ch3\u003eSpring Washer Dimensions (GB9074.26)\u003c\/h3\u003e\n\n\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;max-width:600px;font-size:13px;\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background-color:#f2f2f2;\"\u003e\n      \u003cth\u003eThread (d)\u003c\/th\u003e\n      \u003cth\u003eInner Dia. d1 (mm)\u003c\/th\u003e\n      \u003cth\u003eOuter Dia. d2 (mm)\u003c\/th\u003e\n      \u003cth\u003eThickness s (mm)\u003c\/th\u003e\n      \u003cth\u003eHeight h (mm)\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eM3\u003c\/td\u003e\n\u003ctd\u003e3.1\u003c\/td\u003e\n\u003ctd\u003e5.1\u003c\/td\u003e\n\u003ctd\u003e0.8\u003c\/td\u003e\n\u003ctd\u003e1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eM4\u003c\/td\u003e\n\u003ctd\u003e4.1\u003c\/td\u003e\n\u003ctd\u003e6.8\u003c\/td\u003e\n\u003ctd\u003e0.9\u003c\/td\u003e\n\u003ctd\u003e1.8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eM5\u003c\/td\u003e\n\u003ctd\u003e5.1\u003c\/td\u003e\n\u003ctd\u003e8.2\u003c\/td\u003e\n\u003ctd\u003e1.2\u003c\/td\u003e\n\u003ctd\u003e2.4\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eM6\u003c\/td\u003e\n\u003ctd\u003e6.1\u003c\/td\u003e\n\u003ctd\u003e9.9\u003c\/td\u003e\n\u003ctd\u003e1.6\u003c\/td\u003e\n\u003ctd\u003e3.2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eM8\u003c\/td\u003e\n\u003ctd\u003e8.1\u003c\/td\u003e\n\u003ctd\u003e13.0\u003c\/td\u003e\n\u003ctd\u003e2.0\u003c\/td\u003e\n\u003ctd\u003e4.0\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eProduct Images\u003c\/h2\u003e\n\n\u003ctable border=\"0\" cellpadding=\"8\" cellspacing=\"0\" style=\"width:100%;\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"width:25%;text-align:center;vertical-align:top;\"\u003e[Image 1]\u003c\/td\u003e\n      \u003ctd style=\"width:25%;text-align:center;vertical-align:top;\"\u003e[Image 2]\u003c\/td\u003e\n      \u003ctd style=\"width:25%;text-align:center;vertical-align:top;\"\u003e[Image 3]\u003c\/td\u003e\n      \u003ctd style=\"width:25%;text-align:center;vertical-align:top;\"\u003e[Image 4]\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\n\u003cp\u003eGB9074.4-1988 Phillips pan head SEMS screws in marine stainless steel A4 (SUS316) \/ A4-70 are the premium choice for the most demanding corrosion environments:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMarine \u0026amp; offshore equipment\u003c\/strong\u003e — boat fittings, deck hardware, offshore platform structures, and subsea equipment housings where continuous seawater exposure demands the highest corrosion resistance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoastal \u0026amp; waterfront architecture\u003c\/strong\u003e — façade panels, handrails, signage, and structural fixings in salt-laden coastal atmospheres\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChemical \u0026amp; petrochemical plant\u003c\/strong\u003e — process equipment, pipework supports, and instrument enclosures exposed to chlorides, acids, and aggressive industrial chemicals\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFood \u0026amp; beverage processing\u003c\/strong\u003e — SUS316 is the industry standard for food contact surfaces; ideal for processing machinery, conveyors, and packaging equipment subject to frequent washdown with chlorinated cleaning agents\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePharmaceutical \u0026amp; biotech equipment\u003c\/strong\u003e — cleanroom-compatible, non-magnetic, and resistant to sterilization chemicals including steam, hydrogen peroxide, and chlorine-based disinfectants\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSwimming pool \u0026amp; water treatment\u003c\/strong\u003e — resistance to chlorinated water and pool chemicals that rapidly corrode A2 stainless and zinc-plated fasteners\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMedical devices \u0026amp; surgical equipment\u003c\/strong\u003e — biocompatible, autoclavable, and non-magnetic; suitable for medical instrument assembly and surgical equipment housings\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesalination \u0026amp; water treatment plant\u003c\/strong\u003e — resistance to high-chloride process streams and brine environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eA4 vs A2 — when to upgrade:\u003c\/strong\u003e If your application involves direct seawater contact, chlorinated water, de-icing salts, or aggressive chemical cleaning agents, A4 (SUS316) is strongly recommended over A2 (SUS304). The molybdenum content in A4 provides a critical barrier against pitting corrosion that A2 cannot match in these environments.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch2\u003eWhy FULLERKREG?\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e🏭 \u003cstrong\u003eDirect manufacturer\u003c\/strong\u003e — full control over SUS316 material sourcing, cold forming, and passivation treatment\u003c\/li\u003e\n  \u003cli\u003e📐 \u003cstrong\u003eStandard-compliant\u003c\/strong\u003e — manufactured and inspected to GB9074.4-1988 with full dimensional and material traceability\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eMaterial certification\u003c\/strong\u003e — mill test certificates (MTC) with chemical composition and mechanical properties for SUS316 \/ A4 available on request\u003c\/li\u003e\n  \u003cli\u003e🌍 \u003cstrong\u003eGlobal supply\u003c\/strong\u003e — export packaging, English documentation, and worldwide logistics support\u003c\/li\u003e\n  \u003cli\u003e📦 \u003cstrong\u003eBulk \u0026amp; wholesale ready\u003c\/strong\u003e — available in bulk bags, boxes, or custom packaging for OEM and MRO customers\u003c\/li\u003e\n  \u003cli\u003e🔬 \u003cstrong\u003eQuality assured\u003c\/strong\u003e — incoming material certification, hardness testing, and salt-spray testing (≥ 500 h) available on request\u003c\/li\u003e\n  \u003cli\u003e💬 \u003cstrong\u003eEngineering support\u003c\/strong\u003e — custom sizes, SUS316L (low carbon) options, and special specifications available; contact our technical team\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFor custom specifications, SUS316L options, non-standard sizes, or volume pricing, please contact the FULLERKREG team directly.\u003c\/p\u003e","products":[],"url":"https:\/\/www.fullerkr.com\/collections\/gb9074-4-1988-phillips-pan-head-sems-screws-marine-stainless-steel-a4.oembed","provider":"Fullerkreg Fasteners","version":"1.0","type":"link"}